Pure Turbos N55 Pure750 Hybrid Turbo

The perfect upgrade for your N55 powered BMW. This upgrade offers superior performance and greater durability compared to the standard fitment, with a larger custom billet compressor wheel, larger hi-flow turbine wheel, and upgraded bearing housing VSR balanced and tested.

Features

N55 PURE750 Upgrade Turbo

-608whp on E30 and Meth at 25psi! (This turbo will easily support 650+whp with more fueling and octane)

-Upgraded Point-Milled Billet 7+7 High Flow Compressor Wheel (Out Flows Solid 9 Blade Compressor Wheels)

-Upgraded HiFlow Turbine Wheel

-Dual Compressor Oil Seals, Dual Turbine Oil Seals

-Large Diameter 360 Thrust Upgrade

-New High Flow Stainless Turbofold Decreases spool time by 400-500RPMS

-VSR Balanced of course

-100% Built and Balanced in house in the USA! No out outsourced Machining what so ever

Installing your turbo

Check the operation of engine to make sure it meets manufacturers specifications. Change oil, oil filter and air filter. Replace the oil supply line in all petrol/race fuel applications. Clean line in diesel applications. Do not use a thread sealer (SILICONE) on any oil line. Check oil drain for restrictions to flow such as kinked or deteriorated rubber sections and sharp bends. On fresh, remanufactured engines and heads, flush all oil passages. If applicable check intercooler or after cooler for the same. Remove and thoroughly clean intercooler. Replace the air filter element. Check for flow restrictions, both intake and exhaust, including the catalytic converter. Check for and remove all foreign objects from the intake air tract and secure all hoses. Replace the oil and oil filter. Replace any crank case breather elements. Verify the actuator C clip is secure. Verify the oil drain direction is vertical. Verify the tightness of all clamps and bolts, secure lock tabs if applicable. After installation, be sure to remove all tools from the engine compartment. Before starting the engine, disable either the fuel or ignition system to allow the engine to be cranked without starting. The engine must be cranked until normal oil pressure is developed. Once oil pressure is achieved you may start the engine. Repeat after all oil changes.